Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Petworth?
Panel replacement in Petworth typically runs $250-$500 for a single section, including the new panel and labor. A two-panel job or a premium panel on a wide door can push toward the top of that range, while a standard section on a common door sits near the bottom. We give free estimates, so the written quote you get is the number that counts.
Your garage door is the largest moving part of your home, and a dented, cracked or rotting section is the part people see every time they pull into the alley or walk up the driveway. In a neighborhood of older rowhouses and detached garages like Petworth, we see a lot of panels that took a hit from a car bumper, a bicycle, or years of weather. The good news: a panel swap is one of the least expensive real fixes in the trade, and the door usually works again the same visit.
Panel Replacement Cost Breakdown (2026)
Here are typical estimated ranges for the work we do around Petworth. These are not exact prices; the written estimate sets the final price.
| Job | Typical estimated range |
|---|---|
| Single panel replacement | $250-$500 |
| Two-panel replacement | $400-$800 (two sections, doubled labor and material) |
| Panel plus new rollers | $360-$720 |
| Garage door repair (broader job) | $150-$600 |
| Spring repair (one spring) | $180-$340 |
| Cable repair | $130-$250 |
| Opener repair | $120-$320 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| New door installation | $700-$2200 |
What pushes a panel job toward $500 instead of $250? Usually three things: the style of panel (a raised-panel steel section in a standard size is cheaper than a carriage-house or wood-look panel), the door width (a two-car door section costs more than a single), and whether the old panel came off cleanly. If the tracks bent when the panel was struck, we may need to realign them, and that adds to the bill. If your springs are also worn, replacing them while we’re already on the door often saves you a second visit.
What Affects Panel Replacement Pricing in Petworth
- Panel style and material. Standard steel panels are the least expensive. Carriage-house, insulated, or wood-grain panels cost more because the material and finish take longer to source and fit. We work with Clopay, Amarr, Wayne Dalton, and Raynor panels, so we can usually match what you already have.
- Door size. A single-car door section is smaller and cheaper than a two-car section. Petworth has a mix of narrow detached garages and wider alley-facing doors, and the width alone can shift the price by a hundred dollars or more.
- Condition of the surrounding hardware. A panel that took a hit often bends a hinge or knocks a roller out of its track. We inspect the whole door before quoting, because fixing a panel on a door with a bent track just means the new panel gets damaged too.
- Color and finish matching. Older doors in Petworth can have sun-faded or discontinued colors. If an exact match isn’t available, we’ll tell you up front so you can decide between a close match and repainting the whole door.
- Access to the garage. Alley access, tight parking, and low clearance can slow a job down. We’ll look at your setup when we quote, not after we’ve started.
- Whether it’s really just a panel. If the door won’t move at all, the problem may be a snapped spring or a broken cable rather than a damaged panel. That’s a different repair with a different price, and we’d rather find out before we order a panel you don’t need.
How to Save on Panel Replacement
The biggest savings come from catching the damage early. A small dent that’s cosmetic can often wait until you’re ready; a cracked or separating panel should be fixed before it lets water in and starts rotting the frame. Here are a few practical ways to keep the bill down:
- Fix one panel, not the whole door. If only one section is damaged, replace that section. A full door replacement runs $700-$2200, so treating the damaged panel on its own is almost always cheaper.
- Bundle related repairs. If your rollers are worn or a track is bent, doing that work at the same time as the panel saves a return visit. A panel plus new rollers runs $360-$720, less than two separate appointments.
- Ask for a written estimate before any work starts. We give free estimates and quote the job in writing. Call (833) 509-3461 to set one up.
- Match the panel, don’t over-upgrade. If your door is a standard steel raised-panel, replacing it with the same style is the cheapest route. Upgrading to insulated or designer panels costs more, and the savings in energy are modest for a garage.
- Keep your door lubricated. A door that runs smoothly puts less stress on panels and hardware. A few minutes with a can of garage door lubricant a couple of times a year helps everything last longer.
Can You Replace Just One Panel, or Do You Need a Whole New Door?
In most cases, yes, one panel can be replaced on its own. As long as the door’s structure, springs, cables, and tracks are sound, swapping a single section is a straightforward job that costs $250-$500. A whole new door makes sense when multiple panels are damaged, the door is rusted through in several places, or the frame itself is failing. We’ll tell you honestly which situation you’re in.
What Happens During a Panel Replacement?
We start by looking at the whole door, not just the damaged panel. That means checking the springs, cables, rollers, and tracks to make sure nothing else is about to fail. Then we measure the panel, confirm the style and color, and order the replacement. On the day of the job, we remove the damaged section, fit the new one, adjust the hinges and rollers, and test the door through a full open-and-close cycle. Most single-panel jobs are done in a couple of hours. If you’re not sure whether your door needs a new panel or a different repair entirely, our garage door repair Petworth team can take a look and give you a straight answer.
Springs and cables are the dangerous parts of any garage door. If a spring has snapped or a cable is frayed, don’t try to fix it yourself: those parts are under high tension and can cause serious injury. Leave that work to a trained technician. On the panel side, a loose or damaged panel can also be a security concern if it leaves a gap, so it’s worth addressing sooner rather than later. If your door is stuck open or won’t close, we also offer emergency garage door service, and you can reach us any day we’re open.
Why Choose a Garage Door Specialist for Panel Work?
Panels aren’t universal. A Clopay panel won’t fit an Amarr door, and a Wayne Dalton section has its own profile and hinge spacing. We’re certified to work on eight of the most widely installed brands in residential homes: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters when you’re trying to match a panel on a door that’s been there a while. A generalist will figure it out on-site; we’ve worked on these doors enough to know what fits and what doesn’t. Our technicians have up to 10 years of experience, and every job we take is a garage door job.
We also handle the full range of door work, so if a panel repair turns into something bigger, you don’t need a second company. That includes panel replacement, spring repair, opener repair, and complete new door installation.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Petworth?
Panel replacement in Petworth typically costs $250-$500 for a single section. The final price depends on the panel style, door width, and whether any surrounding hardware needs attention. Call (833) 509-3461 for a free estimate.
Can I replace just one panel?
Yes, one panel can usually be replaced on its own for $250-$500, as long as the rest of the door is in good shape. If several panels are damaged or the frame is failing, a new door may cost less in the long run. Call (833) 509-3461 and we’ll help you decide.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper. A single panel replacement runs $250-$500, while a new door installation runs $700-$2200. Repair makes sense when the door’s structure is sound; replacement makes sense when damage is widespread. Call (833) 509-3461 for an honest assessment.
Why did my panel get damaged in the first place?
Most panel damage comes from impact: a car bumper, a bicycle, a stray ball, or a door that was forced while something was in the way. Wear and weather can also cause cracking or rust over time. If your door won’t open or close properly after a hit, call (833) 509-3461 so we can check the tracks and springs too.
Can you come out on a Saturday?
We’re closed Saturday. We’re open Sunday through Friday, 7am to 7pm, and you can call (833) 509-3461 during those hours to schedule a free estimate or ask about emergency service.
Do you offer emergency service for a door stuck open?
Yes. A garage left open is a security problem, and we offer emergency garage door service for doors that are stuck open or completely inoperable. Call (833) 509-3461 and we’ll get you scheduled as soon as we can.
What brands of panels can you match?
We work with panels from Clopay, Amarr, Wayne Dalton, and Raynor, among the eight brands we’re certified on. If your door is one of those, we can usually find a matching section. Call (833) 509-3461 with your door’s make and model.
Get a Free Panel Replacement Estimate in Petworth
A damaged panel doesn’t have to mean a new door. In most cases we can replace the section that’s damaged, match the style and color, and have your door running smoothly again for $250-$500. We give free estimates, quote the work in writing, and stand behind what we do. If your door won’t move at all, we also offer emergency service. Call (833) 509-3461 today to schedule your estimate or ask about a panel replacement in Petworth.
Pricing reflects the Petworth market as of 2026. Garage Door Repair Petworth offers free estimates – call (833) 509-3461.
Written by the team at Garage Door Repair Petworth.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Adriana Hernandez"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Brandon Lin"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Dana Lawson